Mellanox 40GbE QSFP+ SR4 Optical Transceiver; Up to 150 Meters - Part ID: MMA1B00-B150D

Mellanox® MMA1B00-B150D is a 4-channel, pluggable, QSFP+, VCSEL-based (Vertical Cavity Surface Emitting Laser) optical transceiver designed for up to 150m reach in 40Gb/s Ethernet networks operating at 4x10.3125Gb/s. This transceiver incorporates Mellanox integrated circuit technology, which combines high performance at low power. The transceiver operates over parallel multi-mode fiber (MMF), using a nominal wavelength of 850nm, and is SFF-8436 compliant.

The MMA1B00-B150D transceiver has a standard QSFP+ connector on the electrical side towards the host system for power, control/monitoring and high-speed data. The optical interface is composed of four optical channels/fibers in each direction, intended for a parallel MMF cable via a standard MPO connector. The transceiver can operate 10.3125Gb/s without retiming.

The transceiver provides digital diagnostic monitoring of supply voltage, temperature, transmit/receive power, and VCSEL bias.

– 40GbE (4x10GbE) Ethernet

– Programmable Tx input equalizer

– Programmable Rx output amplitude

– Programmable Rx output emphasis

– SFF-8436 compliant QSFP+

– Single 3.3V supply

– QSFP+ power class 1

– BER better than 1E-15

– Class 1 laser safety

– Up to 150m on OM4 and 100m on OM3 multi-mode fiber

– Digital diagnostic monitoring (DDM)

– Hot pluggable

– RoHS compliant

– IEEE 802.3 40GBASE-SR4 compliant

– SFF-8636 compliant I²C management interface