Search

Myricom 10 Gigabit Ethernet Timecode-Enabled Network Adapter - Part ID: 10G-PCIE2-8C2-2S-SYNC

SKU: 10G-PCIE2-8C2-2S-SYNC
Manufacturer: Myricom
Myri-10G "Gen2" (5 GT/s) PCI Express Two-Port 10-Gigabit Ethernet Timecode-Enabled Network Adapter FOR 10GBASE-SR, 10GBASE-LR, 10GBASE-LRM, AND DIRECT ATTACH - (does not include an SFP+ fiber transceiver or SFP+-terminated "Direct Attach" twinax copper cables) More details...
Price: $875.00
Save to my Wish List Tell a friend

Share this product:

Myricom 10 Gigabit Ethernet Timecode-Enabled Network Adapter - Part ID: 10G-PCIE2-8C2-2S-SYNC
Myricom 10 Gigabit Ethernet Timecode-Enabled Network Adapter - Part ID: 10G-PCIE2-8C2-2S-SYNC
 
Product Details
Benefits
  • Connects to CDMA or GPS timecode sources, providing timestamps traceable back to UTC
  • Allows synchronization with other 10G-PCIE2-8C2-2S-SYNC network adapters
  • Eliminates the need to run less precise protocols such as PTP or NTP
  • Increased throughput performance and low host-CPU utilization achieved with stateless offloads
  • SFP+ sockets for 10GBase-SR, LR and LRM modules, as well as cost-effective Direct Attach copper and EOE cables
  • Latency performance equal to Myricom’s lowest latency product: 10G-PCIE2-8C2-2S
Key Features
  • Compatible with IRIG-B00X timecode formats
  • Wire-speed performance from both network ports concurrently
  • Firmware-controlled stateless offloads
  • 5 million hour MTBF (200 FIT)
Overview

HIGH PERFORMANCE APPLICATIONS
10G-PCIE2-8C2-2S-SYNC network adapters are designed for applications such as cybersecurity and high frequency trading where accurate timestamping, lossless packet sniffing and injection at line rate, and cutting edge latencies are required.

TIMECODE SYNCHRONIZATION
Timecode-based synchronization provides more accurate time information than other approaches such as precision time protocol (PTP) and network time protocol (NTP).

Timecode-based synchronization is not subject to network delays, doesn’t require a dedicated Ethernet network for time distribution, is easier to deploy and maintain, and allows full use of both adapter ports while maintaining timestamp accuracy.

PTP-based solutions are not suited for accurate distributed timestamping and NTP-based solutions are at least an order of magnitude less accurate.

Specifications

HOST PORT INTERFACE SPECIFICATIONS

Bus Interface
PCI Express Gen2 (5 GT/s) x8

Optional PCI Express capabilities supported
Advanced Error Reporting, Function-Level Reset, Device Serial Number, up to 16 outstanding read requests, up to 2KB MaxPayloadSize for all packet types, MSI and MSI/X, SMBus access.

Compliance
PCI Express Card Electromechanical Specification Rev. 2.0
PCI Express Base Specification Rev. 2.0 at 5GT/s or 2.5 GT/s

TIMESTAMPING SPECIFICATIONS
Timestamp precision: 1000ns
Timestamp resolution: 500ns
Maximum offset relative to timecode input: 15ns

ETHERNET SPECIFICATIONS

Throughput
~9.9 Gb/s with a 9KB MTU or ~9.5 Gb/s with a 1500B MTU per port

Ethernet Frame
1500 byte or 9000 byte MTU Compliance
IEEE 802.3x when operating in Ethernet mode

Stateless offloads
IP and TCP checksum offload, send and receive
TSO (TCP Segmentation Offload, also known as Large Send Offload)
LRO (Large Receive Offload)
RSS (Receive-Side Scaling)
Interrupt Coalescing
Multicast filtering

MYRICOM SOFTWARE
Myri10GE for 10-Gigabit Ethernet operation (included)
Sniffer10G™ for lossless packet capture and injection at line rate in cybersecurity (optional)
DBL™ for extremely low UDP and TCP communication latency in financial trading (optional)
VideoPump™ for IPTV and video streaming (optional)
MX-10G™ for HPC (optional)

PHYSICAL CHARACTERISTICS

Ports
10G-PCIE2-8C2-2S: dual 10Gb/s Ethernet or Myrinet

Timecode input
SMB connector with internal 50Ω termination

Form Factor
Low-profile PCI Express x8 add-in card
68.9mm x 167mm exclusive of the PCI faceplate
Total thickness: 22mm
Weight: 105.7g (0.233lb), inclusive of standard PCI faceplate
Custom form factors also available

Power:

TypicalMaximum
Direct Attach14.8W16.3W
SFP+ SR/LR15.0W16.5W
SFP+ LRM16.5W18.0W

ENVIRONMENTAL SPECIFICATIONS

Temperature
Operating: 0°C to 55°C (32°F to 131°F) up to 10,000 foot altitude with 100LFM minimum airflow
Storage: -40°C to 70°C (-40°F to 158°F)

Humidity
Relative humidity (non-condensing): 15% to 80% @ 50°C
Storage: Relative humidity 90% @ 65°C

Maximum Cable Distances
SFP+ Direct Attach cables up to 10m
SR, LR, and LRM length per IEEE specification

REGULATORY APPROVALS, COMPLIANCE

EMI and EMC (Class A)
USA, Canada, Europe, Australia/New Zealand, Japan

Compliance
TAA
Reduction of Hazardous Substances (RoHS)

Laser Safety
Class 1 when used with 10GBase-SR, 10GBase-LR or 10GBase LRM SFP+ transceivers

COUNTRY OF ORIGIN
USA

Manufacturer Warranty
Standard Warranty: 3-year repair or replacement warranty, excluding physical damage or abuse.


Previous Item   Next Item

Customer Account:



Talk to Us for all your questions / RFQs

Recently Viewed Products