HIGH PERFORMANCE APPLICATIONS
10G-PCIE2-8C2-2S-SYNC network adapters are designed for applications such as cybersecurity and high frequency trading where accurate timestamping, lossless packet sniffing and injection at line rate, and cutting edge latencies are required.
TIMECODE SYNCHRONIZATION
Timecode-based synchronization provides more accurate time information than other approaches such as precision time protocol (PTP) and network time protocol (NTP).
Timecode-based synchronization is not subject to network delays, doesn’t require a dedicated Ethernet network for time distribution, is easier to deploy and maintain, and allows full use of both adapter ports while maintaining timestamp accuracy.
PTP-based solutions are not suited for accurate distributed timestamping and NTP-based solutions are at least an order of magnitude less accurate.
HOST PORT INTERFACE SPECIFICATIONS
Bus Interface
PCI Express Gen2 (5 GT/s) x8
Optional PCI Express capabilities supported
Advanced Error Reporting, Function-Level Reset, Device Serial Number, up to 16 outstanding read requests, up to 2KB MaxPayloadSize for all packet types, MSI and MSI/X, SMBus access.
Compliance
PCI Express Card Electromechanical Specification Rev. 2.0
PCI Express Base Specification Rev. 2.0 at 5GT/s or 2.5 GT/s
TIMESTAMPING SPECIFICATIONS
Timestamp precision: 1000ns
Timestamp resolution: 500ns
Maximum offset relative to timecode input: 15ns
ETHERNET SPECIFICATIONS
Throughput
~9.9 Gb/s with a 9KB MTU or ~9.5 Gb/s with a 1500B MTU per port
Ethernet Frame
1500 byte or 9000 byte MTU Compliance
IEEE 802.3x when operating in Ethernet mode
Stateless offloads
IP and TCP checksum offload, send and receive
TSO (TCP Segmentation Offload, also known as Large Send Offload)
LRO (Large Receive Offload)
RSS (Receive-Side Scaling)
Interrupt Coalescing
Multicast filtering
MYRICOM SOFTWARE
Myri10GE for 10-Gigabit Ethernet operation (included)
Sniffer10G™ for lossless packet capture and injection at line rate in cybersecurity (optional)
DBL™ for extremely low UDP and TCP communication latency in financial trading (optional)
VideoPump™ for IPTV and video streaming (optional)
MX-10G™ for HPC (optional)
PHYSICAL CHARACTERISTICS
Ports
10G-PCIE2-8C2-2S: dual 10Gb/s Ethernet or Myrinet
Timecode input
SMB connector with internal 50Ω termination
Form Factor
Low-profile PCI Express x8 add-in card
68.9mm x 167mm exclusive of the PCI faceplate
Total thickness: 22mm
Weight: 105.7g (0.233lb), inclusive of standard PCI faceplate
Custom form factors also available
Power:
| Typical | Maximum |
| Direct Attach | 14.8W | 16.3W |
| SFP+ SR/LR | 15.0W | 16.5W |
| SFP+ LRM | 16.5W | 18.0W |
ENVIRONMENTAL SPECIFICATIONS
Temperature
Operating: 0°C to 55°C (32°F to 131°F) up to 10,000 foot altitude with 100LFM minimum airflow
Storage: -40°C to 70°C (-40°F to 158°F)
Humidity
Relative humidity (non-condensing): 15% to 80% @ 50°C
Storage: Relative humidity 90% @ 65°C
Maximum Cable Distances
SFP+ Direct Attach cables up to 10m
SR, LR, and LRM length per IEEE specification
REGULATORY APPROVALS, COMPLIANCE
EMI and EMC (Class A)
USA, Canada, Europe, Australia/New Zealand, Japan
Compliance
TAA
Reduction of Hazardous Substances (RoHS)
Laser Safety
Class 1 when used with 10GBase-SR, 10GBase-LR or 10GBase LRM SFP+ transceivers
COUNTRY OF ORIGIN
USA
