AES2002P
|
|
|
|
AES2002P
|
|
| |
|
Product Details
|
AURCORE AES2002P – 24-Port Gigabit PoE+ Managed Ethernet Switch The AURCORE AES2002P is an enterprise-class Layer 2+ managed Gigabit Ethernet switch designed for business networks, campuses, surveillance installations, and wireless access deployments. It combines 24 Gigabit PoE+ RJ45 ports with two Gigabit copper/SFP combo ports and two dedicated Gigabit SFP uplinks. Powered by AURC-NOS and supporting centralized ACC/ACN management, the AES2002P provides comprehensive network administration, security, traffic management, and Power over Ethernet functionality. Product Highlights - 24 x 10/100/1000 Mbps RJ45 PoE+ ports
- 2 x Gigabit RJ45/SFP combo ports
- 2 x Gigabit SFP uplink ports
- IEEE 802.3af/at PoE and PoE+ support
- 370 W total PoE power budget
- 56 Gbps switching capacity
- 41.66 Mpps packet forwarding rate
- Layer 2+ management and static routing
- VLAN, link aggregation, QoS, and ACL support
- PoE watchdog, scheduling, and port priority
- Web GUI, CLI, SSH, Telnet, and SNMP management
- ACC and ACN centralized management support
- 1U rack-mount or desktop installation
Network and Software Features Layer 2, VLAN, and Availability - Up to 4K active VLANs
- Voice VLAN support
- Static and LACP link aggregation
- STP, RSTP, and MSTP spanning tree protocols
- BPDU guard, filtering, and transparent mode
- Root guard and loop detection
- IGMP snooping
- ERPS ring protection
- MRPP, BFD, Ethernet OAM, and ULDP
- Static routing
Network Security - Port security and port isolation
- IP source protection
- Dynamic ARP protection
- DHCP snooping and DHCP relay
- IEEE 802.1X authentication
- RADIUS and TACACS+ authentication
- Access Control Lists (ACLs)
- Hierarchical user permissions
- Broadcast storm suppression
- Illegal-packet detection
- DDoS prevention features
- HTTPS/SSL management security
Quality of Service (QoS) - Ingress and egress rate limiting
- Port-based and flow-based traffic management
- Traffic classification by port
- Source and destination MAC/IP classification
- IEEE 802.1p priority support
- CoS and DSCP classification
- WRR, SP, and WDRR scheduling
- DSCP and CoS mapping
Power over Ethernet (PoE) - 24 Gigabit Ethernet PoE+ access ports
- IEEE 802.3af and 802.3at compatibility
- 370 W total PoE power budget
- PoE watchdog functionality
- PoE scheduling
- PoE port priority management
- PoE warm-start support
Management and Diagnostics - Web-based graphical management interface
- Console command-line interface (CLI)
- SSH and Telnet remote management
- SNMP v1/v2c/v3 and SNMP traps
- AURC-NOS network operating system
- ACC and ACN centralized management
- RSPAN and port mirroring
- Flow-based traffic mirroring
- LLDP and LLDP-MED
- NTP and SNTP time synchronization
- DNS client, ping, and traceroute
- Digital Diagnostic Monitoring Interface (DDMI)
- MIB-II support
- Zero-Touch Provisioning (ZTP)
- Firmware upgrade functionality
- Configuration import and export
- Multiple configuration files
- System and event logging
- FTP, TFTP, and SFTP file transfers
Technical Specifications | Manufacturer / Model | AURCORE / AES2002P | | Switch Type | Managed Layer 2+ Gigabit Ethernet PoE+ Switch | | Access Interfaces | 24 x 10/100/1000 Mbps RJ45 PoE+ ports | | Additional Interfaces | 2 x Gigabit Base-T/SFP combo ports 2 x Gigabit SFP ports | | Management Interface | 1 x Console port | | Chipset | Realtek | | Switching Capacity | 56 Gbps | | Forwarding Rate | 41.66 Mpps | | MAC Address Table | 8K entries | | Flash Memory | 32 MB | | System Memory | 128 MB RAM | | PoE Standards | IEEE 802.3af / IEEE 802.3at | | Total PoE Budget | 370 W | | Rated Power Supply | 400 W (manufacturer specification) | | AC Input | 100–240 V AC, 50/60 Hz | | Idle Power Consumption | 16.6 W at 115 V / 60 Hz 16.0 W at 230 V / 50 Hz | | Full-Load Power Consumption | 461.5 W at 115 V / 60 Hz 447.7 W at 230 V / 50 Hz | | Operating Temperature | 0°C to 40°C (32°F to 104°F) | | Storage Temperature | -40°C to 70°C (-40°F to 158°F) | | Surge Protection | Differential mode: ±4 kV Common mode: ±6 kV | | Electrostatic Discharge | Contact: ±6 kV Air: ±8 kV | | Dimensions (L x W x H) | 17.32 x 8.15 x 1.73 inches (1U) | | Mounting Options | Rack mount or desktop | | Included Accessories | 2 x Rack-mount brackets 4 x Rubber feet 8 x Screws 1 x Console cable 1 x Power cord | Ideal Applications - Enterprise and small-to-medium business networks
- Campus and educational institution networking
- Wireless access point deployments
- IP surveillance and security camera installations
- VoIP telephone networks
- Segmented office networks using VLANs
- Centralized management of PoE-powered devices
Product Documentation
|
|
|
|
|
|