Neterion X3120 10 Gigabit Ethernet Adapter Card - Part ID: X3120SR0001
|
|
|
|
|
SKU: X3120SR0001
Fully-Virtualized adapter, Dual-Port, SFP+ SR, PCIe x8 low-profile More details...
|
|
|
|
Neterion X3120 10 Gigabit Ethernet Adapter Card - Part ID: X3120SR0001
|
|
| |
|
Product Details
|
Highlights - The X3100 Series is based on a powerful multichannel architecture that combines the efficiency of state machines with the flexibility of embedded processor cores. The adapter offers unparalleled performance for virtualized environments.
- A high-performance, PCIe x8 system interface, combined with extensive protocol offloads, maximize host efficiencies by reducing host processing loads and optimizing bus utilization.
- Two network ports with fully integrated IEEE 802.3ad link redundancy features are designed to meet the demanding redundancy and high availability requirements of critical data center applications.
- Best-in-class I/O Virtualization (IOV) capabilities. Each virtual function is provisioned with its own dedicated hardware channel inside the ASIC, guaranteeing isolation while simplifying system manage-ment. A single X3100 Series adapter appears as multiple 10 GbE adapters to the PCI subsystem and can be managed like a traditional Gigabit network.
- Neterion IOQoS™ (I/O Quality of Service) support for each virtual function, allowing traffic to be classified, prioritized, and queued at line rate.
- High-performance ASIC-based implementation for minimum latency and attractive power consumption.
Specifications
General - 10 Gbps PCIe Ethernet adapter
- Multiple PHY options, including 10GBASE-SR, LR, and DA
- Available in single port and dual port configurations
PCI Express - PCIe 2.0 Compliant (2.5 GT/s)
- Interrupt support: INTA, MSI, MSI-X
- Power management (PME) capabilities
- BootROM (PXE) support
Ethernet Media Access Controller (MAC) - IEEE 802.3ae 10 Gb Ethernet
- IEEE 802.3ad Link Aggregation and Failover
- IEEE 802.3D QoS Support
- IEEE 802.1Q VLAN Tag support
- IEEE 802.3X Pause Frame support
- Up to 512 MAC addresses
- Jumbo Frame support (up to 9622 Bytes)
- Integrated traffic classification/steering capabilities, including Microsoft Receive-Side Scaling (RSS)
- 64MB external receive packet buffer
I/O Virtualization Support - PCI-SIG SR-IOV 1.0 (via optional firmware upgrade)
- Special "multi-function PCI device" mode brings true IOV to any industry-standard server. In multi-function mode, up to 8 physical functions are available (more in ARI-capable systems). Each physical function appears to the system as an independent Ethernet card
- Unique, hardware-based multi-channel architecture mitigates head-of-line blocking and allows direct data transfer between hardware channels and host-based Virtual Machines without hypervisor intervention (greatly reducing CPU workload)
- VMware® NetQueue support
- Dedicated per-VF statistics and interrupts
- Support for function-level reset (FLR)
- Fully integrated Layer 2 switching function
- Ingress replication queue (for broadcast packets)
TCP/UDP/IP Stateless Offloads - Checksum offload for TCP/UDP/IP (IPv4 and IPv6)
- Large Send Offload for TCP/UDP (IPv4 and IPv6)
- Advanced packet classification and prioritization
Management - IEEE, MIB, MIB2, RMON, and RMON2 statistics
Operating System Support - Microsoft Windows Server 2003 and 2008
- Red Hat Enterprise Linux 4 and 5
- SUSE Linux Enterprise Server 10 and 11
- VMWare ESX Server 3.5 and 4.0
- Red Hat, SLES and Citrix XEN
- Solaris 10 Update 4 and 5
Physical Dimensions and Environmental - Bus Type: PCIe x8
- Bus Speed: 2.5 GT/s per lane
- Power Consumption: 12W (single port), 14 W (dual port)
- Dimensions: 6.6" x 2.5" (low profile)
- Operating Temperature: 0 to 55°C
- Operating Humidity: 5 to 95%
- RoHS-6 Compliant
Safety / EMC - cTUVus / UL
- FCC Part 15 (USA)
- Class B ICES-003 (Canada)
Interconnect 10GBase-SR (Short Reach Optical) - Maximum reach:300 m
- Connector type:LC
- Module type: SFP+
- Cable type: Multi-mode fiber
10GBase-LR (Long Reach Optical) - Maximum reach:10 km
- Connector type:LC
- Module type: SFP+
- Cable type: Single-mode fiber
10GBase-CR (twinax/direct attach) - Maximum reach:5m (up to 7m with Neterion certified cables)
- Connector type:SFP+ DA
- Cable type: Qualified twinax DA cables
X3100 Series Overview | Part Number | Ethernet Ports | Interconnect | Form Factor | Host Bus | | X3110SR0001 | Single Port | SR | Low Profile (Both full and half height brackets are provided) | PCIe x8 | | X3120SR0001 | Dual Port | | X3110DA0001 | Single Port | DA | | X3120DA0001 | Dual Port | | X3110DA0002 | Single Port | LR | | X3120DA0002 | Dual Port |
|
|
|
|
|
|